Laboratory Automatic Suppository Filling Machine Production Line Equipment

APM-USA

$300,000.00 
SKU: P2613S

suppository filling machine

Working Principle:
1, Thermoforming:
The PVC/PE film into the forming area after preheating mold -- > forming mold blowing mold -- >blow film forming.
triangle knife cutting process and dotted line.
2, Filling:
6 filling heads, forming suppository for one-time embedded type filling, filling accuracy + / - 2%, material barrel has electric heating insulation system, with stirring motor at the top to make the medicine in a uniform state, material barrel pump into the medicine by the high precision of filling head, filling a residual medicine through the other end of the cycle to the raw material filling barrel again next time.
3, Cooling:
Drugs into the cooling racks after the whole filled, external cooling box is equipped with water chiller, cooling air through the cooling box of four condenser suppository of cooling rack to cool.
sealing and part code:
4. Sealing and Cutting:
After cooling of the solid suppository into the sealing area: preheating mold -- -- > the sealing mould -- - > code mold. And then to shear a set of finished product for 5 and 6 grain (be) according to customer's requirements.

Technical Parameters :

output
2400-3600granules/hr
single dosage
0.5—5ml
dosage allowed
?±2%
Suppository application form
Bullet-head form, duck-mouth form and other special forms
used to the host
Synthesis of glycerin fatty acids, glycerin gelatin, polyethylene glycol etc.
store the capacity of the liquid barrel
20L
working atmospheric pressure
0.6Mpa
consumption gas/minute
0.6m3
used water quantity
15kg /hr(cycle using)
the voltage of the power
The three phase AC 380V
total power
2.5KW
external dimension
3200mm×1530mm×1600mm
total weight
300kg
Packing material
PVC, PVC/PE film, thickness 0.15mm

There will no further notification if the appearance or parameters of our products are modified. Thanks.